Kathrein UFD 170 manual During the download, Please wait fl ashes on the screen

Installation Menu

The receiver then begins the update process. If your receiver is already up to date, a message appears on the screen to notify you of this.

Once the update is complete, the receiver is re-initialised and starts operation again. In case of an error or no signal, the message “Download failed” appears.

N ever turn off the receiver during the update process, as otherwise you could lose the entire software. It will then need to be re-installed in a workshop or using a PC and n ull modem cable.

During the download, “Please wait” fl ashes on the screen.

Follow all on-screen instructions.

After a software update, you must reset the clock and check whether the “ HDP Antenna Setup” menu option in the main menu is set to “On ” . If not, set the selection to “On ” using the cursor keys, as otherwise you will not be able to operate or actuate the turntable.

You can also download the updates from the Internet. The address is:

http://www.kathrein.de

First click on “Service” and then on “Software and Download”. Select “Receiver”.

The page provides instructions for the procedure.

60