Alignment (Satellite Search)
After successful fi
The set position (the satellite found) is saved.
Manual Correction
At the margins of the footprints of a satellite (e.g. after a slight change of position), it may be necessary for you to manually correct the setting (not normally required). It is also possible to manually correct the fi ne tuning.
Press in the main menu and then use the keys to switch to the “HDP antenna setup” option. Then press
to go to the HDP menu.
You can correct the inclination and horizontal angle of the antenna using the “Elevation” and “Azimuth direction” settings. To do this, press
the keys or enter a fi gure using the number keys and confi rm
with . Check your settings by referring to the “Level” and “Qual” bars on the
quality the signal received. At the same time, you can use the key to activate a search tone, the level of which corresponds to the signal strength. The graphical display in the lower section of the screen (green with red dot) represents the relative position of the antenna.
While the antenna turntable is moving in the desired direction, a cor- responding message for Elevation and Azimuth direction appears (ex- ample).
65
