Audio Settings
The following audio settings are possible: |
| ||
Soundtrack | 1 of 2 | 2 of 2 | 3 of 3 |
Audio mode | Stereo | Mono left | Mono right |
Digital output | MPEG stereo | Dolby Digital/AC 3 | |
AC 3
| The receiver has an audio output for AC 3 format (Dolby Digital). This |
| gives you the opportunity to bring cinema quality sound into your living |
| room. Only connect the digital audio output to an appropriate Dolby |
| Digital system. |
Note: | Always follow the safety instructions and the operating instructions for |
| your Dolby Digital system! |
| Only a few programme providers broadcast the AC 3 format. If no |
| AC3 signal is received, you can only make the normal stereo or mono |
| settings and choose the broadcast languages. |
Turning Off the Sound - Mute
Press on the remote control. The sound is turned off. The following display appears on the screen:
Press again to turn the sound back on. The normal volume display bar appears for a short time.
Although you can change the programme while the sound is muted, the sound is only reactivated if you cancel mute mode by pressing
or adjusting the volume.
31
