Removing and Installing a PRP
Required Tools and Equipment
You need the following tools and parts to remove and install a PRP:
•
•
•Antistatic mat, foam pad, or bag for the removed PRP. Place the removed PRP into an antistatic bag if you plan to return it to the factory, or on an antistatic mat or foam if you are replacing components and will reinstall the PRP.
Working with Electrical Equipment
Follow these basic guidelines when working with any electrical equipment:
•Before beginning any procedure requiring access to the chassis interior, locate the emergency
•Disconnect all power and external cables before moving a chassis.
•Do not work alone when potentially hazardous conditions exist; never assume that power has been disconnected from a circuit; always check.
•Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
•Carefully examine your work area for possible hazards such as moist floors, ungrounded power extension cables, and missing safety grounds.
Removing and Installing a PRP
The following sections describe the procedures for removing and installing a PRP as well as removing and installing other
•Removing a PRP, page 21
•Installing a PRP, page 24
| Performance Route Processor Installation and Configuration Guide |
20 |
