Setting System Parameters
Local Time/Timer
Help for the selected item is available by pressing
the key. Press the
key again to exit the Help menu.
You may need to correct the “Summer- time” setting . Use
the keys to go to the “day- light savings time” option. Here, you can
use the keys to turn this time setting on or off.
With the factory setting, the receiver indicates the “UTC” (United Time Coordinate, previously Greenwich Mean Time), which is transmitted with the data stream. For Germany, the time must therefore be correc- ted by +1 hour.
To do this, move the cursor bar to the “Local Time/Timer” menu option
using the key. You can use the keys to correct the time for- wards or backwards in
If the time displayed by the receiver differs from the correct time by just a few minutes, proceed as follows:
-Use the keys to go to the “Local Time/Timer” menu option and change the time by approx. 10 hours (forwards) using
the keys
- Then fi rst press to switch the receiver to Standby mode, and disconnect it briefl y from the power supply for a few seconds using the power switch.
-Start up the receiver again and, from the main menu, switch to the “System Parameters”
-If necessary, correct the time in
Pressing twice takes you back to the normal TV picture.
Note: | After doing this, do not initially turn off the receiver with |
| the power switch but use the remote control for this pur- |
| pose, as otherwise the settings will be lost |
TV Type
Here, you can use the keys to specify whether your TV set is a - PAL
-
Pressing twice takes you back to the normal TV picture.
Picture Format
Here, you can use the keys to select the type of picture format for which your TV set is designed. This will either be
-4:3 format
-16:9 format or
-Auto
Pressing twice takes you back to the normal TV picture.
48
