Connection and Setup
TV Connection
Connect the UFD 170 (TV Scart socket) and the TV set with a Scart cable. If your TV has a stereo feature, you can receive the sound in stereo via the Scart connection.
Audio Connection
If you want to play the sound on your
Dolby Connection
The Dolby Digital data fl ow output (AC 3) is intended for connection to a Dolby Digital system.
IR Receiver
Connect the infrared receiver to the “IR REMOTE IN” socket and position it such that it has a visual connection to the remote control. The UFD 170 can only be operated by remote control.
Inserting Batteries in the Remote Control
Remove the cover on the rear of the remote control. Insert the two batteries supplied into the remote control, ensuring correct polarity - this is shown on the base of the battery compartment.
Slide the cover back onto the housing until it clicks into place. Used batteries are special waste. Do not throw used batteries into your household waste; take them to a collection point for old batteries.
Electronic equipment is not household waste - in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 27th January 2003 on used electrical and electronic equipment, it must be disposed of properly.
At the end of its service life, take this unit for disposal at a relevant offi cial collection point.
9
