SECTION II. GETTING READY TO SEW
Connecting Machine to Power Supply
(_ Power supply plug _) Power switch
(_ Outlet
@Machine socket
@Machine plug
/
Before connecting the power cord, make sure the voltage and frequency shown on the machine conform to your electrical power.
1.Turn off the power switch (:_).
2.Insert the machine plug@into the machine socket (_.
3.Insert the power supply plug (_ into the outlet (_).
4.Turn the power switch(_ to activate the power.
Before Using Your Serger
Before using your serger for the first time, place a t waste fabric under the presser foot and run the with thread for a few minutes. Wipe away any
may appear......
For Your | Safety | ..... |
*Whileinoperation,alwayskeep_ | _es | |
area. Do not touch any moving #:_ | Such as | |
or needle |
| |
* Always turn off | from | |
power | ...... |
|
- When |
| ......... |
or removing |
| |
- When cle_ i_ ibe machine |
| |
*Uonotplac_ | _ingonthe f_ | _trol, when not sewing. |
is intended to fit in a polarized outlet only one way. tf the plug does not fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way.
Foot Controller Model
(XXX represents numbers 000 through 999).
Controlling Serging Speed
Serging speed can be varied by the foot control.
The harder you press on the foot control, the faster the machine runs.
@
\\\
J
%
