13-2 ICE MAKER FUNCTIONS
13-2-1 Icemaking Mode
1.Icemaking refers to the freezing of supplied water in the ice tray. Complete freezing is assured by measuring the temperature of the Tray with Icemaking SENSOR.
2.Icemaking starts after completion of the water fill operation.
3.The Ice Making function is completed when the sensor reaches 19°F
13-2-2 Harvest Mode
1.Harvest (Ice removing) refers to the operation of dropping ices into the ice bin from the tray when icemaking has completed.
2.Harvest mode:
(1)The Heater is ON for 30 seconds, then the motor starts.
(2)The feeler arm senses the quantity of ice in the ice storage bin while rotating with the EJECTOR.
A.Ice storage bin is full : The EJECTOR stops (heater off).
B.Ice storage bin is not full : The EJECTOR rotates twice to open for ice.
If the EJECTOR does not rotate once within 5 minutes in B mode, separate heater control mode starts operating to prevent the EJECTOR from being constrained. (It is recommended that the user open for ice to return to normal mode.)
13-2-3 Fill/Park Position
1.Once a normal harvest mode has been completed, the water solenoid will be activated.
2.The amount of water is adjusted by pressing the Fill Key repeatedly. This changes the time allowed for fill as illustrated in the table below.
Water supply amount TABLE
STAGE | TIME TO SUPPLY | INDICATIONS | REMARKS | |||||
|
|
|
|
|
|
|
|
|
1 | 5 sec. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| The water amount will vary |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| depending on the water control |
| 5.5 sec. |
|
|
|
|
|
| |
2 |
|
|
|
|
|
| Switch setting, as well as the | |
(FIRST STAGE) |
|
|
|
|
|
| ||
|
|
|
|
|
| water pressure of the connected | ||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| water line. |
3 | 6 sec. |
|
|
|
|
|
| |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- 66 -
