Door Gasket Removal
1.Remove door frame cover
Starting at top of cover and working down, snap cover out and away from door.
Frame Cover 
Handle
Figure 1
2.Remove gasket bracket clips
There are two clips on each door. Start bracket removal near one of the middle clips.
1)Pull gasket back to expose gasket bracket clip and door frame.
2)Insert a flat tip screwdriver into seam between gasket bracket and door frame and pry back until clips snap out.
3)Continue prying back along seam until all clips snap out.
Door Gasket Replacement
1.Insert gasket bracket clips
1)Insert gasket bracket edge beneath door frame edge.
2)Turn upper gasket bracket spring so that the spring ends are in the door channel.
3)Push in clip until you hear it snap securely into place.
Gasket
Bracket Clip
Spring
Door
Frame
CorrectIncorrect
Figure 4
4) Push in remaining clip until you hear it snap securely into place.
Note : Make sure that no part of gasket bracket edge protrudes from beneath door frame edge.
2.Insert gasket into channel
1)Snap gasket assembly into the door bracket.
<Inserting the Gasket Assembly into the Bracket Door>
Door
Frame
Flat Tip Screwdriver 
Gasket
Bracket Clip
Gasket
Bracket
Figure 2
Correct |
3.Remove gasket
Pull gasket free from gasket channel on the three remaining sides of door.
Figure 3
Incorrect | Figure 5 |
|
- 7 -
