Kenmore 795-71022.010 service manual Component Testing Information

11. COMPONENT TESTING INFORMATION

11-1 Defrost Controller Assembly

Function	- Controller assembly is consist of 2 kinds of part those are fuse-m and sensor. we can
	decide part is defect or not when we check the resistance.
	- Fuse-M can cut off the source when defrost heater operate the unusual high temperature.
	- Sensor give temperature information to Micom
How to		Measure the 2 pin connected to Fuse-M.
Measure
		If the ohmmeter indicate below 0.1ohm
(Fuse-M)
		Fuse-M is good. If Fuse-M measures infinite
	(1) to (2)	ohms, it is open and needs to be replaced.

How to Measure (Sensor)

	Measure the 2 pin connected to Sensor.
	If the ohmmeter indicate 11 (at room
	temperature) It is normal.
	Checking the resistance at other
(1) to (2)	temperatures, check the sensor resistance
	chart.

Standard

Fuse-M (at all temperature)

Test Point	Ressult
(1) to (2)	0 ~ 0.1

Sensor (at room temperature)

Test Point	Ressult
(1) to (2)	11

- 49 -