1

2

3

4

5

6

7

8

9

10

11

■Fixed Station Operation

In order to use this transceiver for fixed station operation, you will need a separate 13.8 V DC power supply that must be purchased separately. The recommended current capacity of your power supply is

12A.

1Connect the DC power cable to the regulated DC power supply and check that polarities are correct (Red: positive, Black: negative).

•DO NOT directly connect the transceiver to an AC outlet!

•Use the supplied DC power cable to connect the transceiver to a regulated power supply.

•Do not substitute a cable with smaller gauge wires.

2Connect the transceiver’s DC power connector to the connector on the DC power cable.

•Press the connectors firmly together until the locking tab clicks.

Press firmly.

Fuse holder

Note:

◆ For your transceiver to fully exhibit its performance capabilities,

the following optional power supply is recommended:

PS-33 (20.5 A, 25% duty cycle).

◆ Before connecting the DC power supply to the transceiver, be

sure to switch the transceiver and the DC power supply OFF.

◆ Do not plug the DC power supply into an AC outlet until you

12

13

14

15

16

17

18

19

20

21

Fuse holder

Red (+)

Black (–)

Regulated DC power supply

To AC outlet

make all connections.

4