ACCESSORY CONNECTIONS

1

2 ■ External Speakers

3If you plan to use external speakers, choose speakers with an impedance of 8 Ω. The external speaker jacks

4accept a 3.5 mm (1/8") diameter mono (2-conductor)

5plug. Recommended speakers include the SP-50B and SP-41.

6

 

 

 

 

7

 

 

 

 

8

 

 

 

 

9

 

 

 

 

10

 

 

 

 

11

 

 

 

 

12

■

Microphone

 

 

 

 

 

13

 

To communicate in the voice modes, plug a 600 Ω

 

 

14

 

microphone equipped with an 8-pin modular connector

15

 

into the modular socket on the front panel of the

 

transceiver. Press firmly on the plug until the locking tab

 

 

16

 

clicks.

 

 

 

 

K

 

 

 

 

EN

 

 

 

 

WO

 

 

17

 

OD

FM

 

 

 

DUAL

V7

 

 

 

 

BANDERTM-

18

 

 

 

 

19

 

 

 

 

20

 

 

 

 

21

 

 

 

 

PACKET EQUIPMENT CONNECTIONS

If you intend to use this transceiver for Packet operation, you will need the following equipment.

•Personal computer with communications software

•Terminal Node Controller (TNC)

•TNC power supply

•RS-232C cable

•6-pin mini DIN plug (optional PG-5A)

For the DATA connector pins, refer to “PACKET OPERATION” {page 79}.

Note:

◆Do not share a single power supply between the transceiver and the TNC.

◆Keep as wide a separation between the transceiver and computer as practical to reduce noise-pickup by the transceiver.

◆One end of the optional PG-5A cable has not been connectorized. Attach the appropriate connector that mates with the TNC connector.

RS-232C cable

KENWOOD FMDUAL

Transceiver

TNC power power supply supply

KENWOOD FMDUALBANDERTM-000

TNCTM-V7

PG-5A cable

6