FRONT PANEL

1

Note: This section describes only the main functions of the front panel

2controls and buttons. For the functions not described here, you will find

explanations in the appropriate sections of this manual.

3

4

5

CALL

PWR

 

 

6

 

 

7

 

 

8

 

 

9

 

 

10

q CALL button

11

Recalls the Call channel {page 33}. Also starts or stops

12

Call/VFO Scan {page 48} when in VFO mode, or

Call/Memory Scan {page 48} when in Memory Recall

 

13

mode.

14

w VFO button

15

Selects the VFO mode {page 8}. In this mode you can

16

change the operating frequency, using the Tuning control

or Mic [UP]/[DWN]. Also provides:

17

• VFO Scan start/stop to scan the entire VFO range {page 44}.

18

• Program Scan start/stop to scan a programmed range of

frequencies {page 46}.

 

19

 

20

21

eMR button

Selects the Memory Recall mode {page 31}. In this mode you can change memory channels, using the Tuning control or Mic [UP]/[DWN]. Also starts or stops Memory Scan {page 44}.

rTuning control

Selects:

•Operating frequencies when in VFO mode.

•Memory channels when in Memory Recall mode {page 31}.

•Menu Nos. when in Menu mode {page 19}.

This control is used for various other selections.

tMHz button

Selects the MHz mode. In this mode you can change the operating frequency in 1 MHz steps or 10 MHz steps {page 17}, using the Tuning control or Mic [UP]/[DWN]. Also starts or stops MHz Scan {page 47}.

10