Flow Chart for Repeater Access

Select a band.

Select a receive frequency.

Select an offset direction.

Select an offset frequency.

Activate the Tone function, if necessary.

Select a tone frequency, if necessary.

Press Mic [PTT].

■Selecting Offset Direction

Select whether the transmit frequency will be higher (+) or lower (–) than the receive frequency.

Press [F], [SHIFT].

•Each time you repeat this key operation, the offset direction changes as shown below.

TM-V7A/E

Simplex

 

+

−

 

 

 

 

(VHF)

 

 

 

 

TM-V7A

 

 

 

 

(UHF)

 

 

 

 

 

Simplex

+

−

−

TM-V7E

−

(UHF)

 

 

 

 

If the offset transmit frequency falls outside the allowable transmit frequency range, transmitting is inhibited until the transmit frequency is brought within the band limits

by one of the following methods:

• Move the receive frequency further inside the band.

• Change the offset direction.

Note: While using a split memory channel or transmitting, you cannot change the offset direction.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

23