Kenwood TM-V7A, TM-V7E SUPPLIED ACCESSORIES, CONVENTIONS FOLLOWED IN THIS MANUAL, KEY, KEY, KEY, [F], KEY, [F], [F], KEY, [F], KEY, KEY1, KEY1, KEY2, [KEY], [PWR], Accessory

SUPPLIED ACCESSORIES

Accessory	Part Number	Quantity
Microphone
U.S.A./ Canada/	T91-0568-XX	1
General (some): MC-53DM 1
Europe/	T91-0396-XX	1
General (some): MC-45 1
DC power cable	E30-2111-XX	1
Transceiver fuse (15 A)	F51-0017-XX	1
Mounting bracket	J29-0632-XX	1
Mounting bracket screws	N99-0331-XX	1 set
Microphone hanger 2	J19-1526-XX	1
(U.S.A./ Canada only)
Microphone hanger screws 2	N46-3010-XX	2
(U.S.A./ Canada only)
Warranty card	—	1
(U.S.A./ Canada/ Europe only)
Instruction manual	B62-0678-XX	1

1The MC-53DM and MC-45 microphones are also sold as optional accessories {page 83}.

2Attach the microphone hanger at an appropriate position.

Microphone hanger

Microphone hanger screw

CONVENTIONS FOLLOWED IN THIS MANUAL

The writing conventions described below have been followed to simplify instructions and avoid unnecessary repetition.

ATTENTION: MOST PROCEDURES REQUIRE THAT YOU PRESS AN APPROPRIATE KEY IN EACH STEP WITHIN APPROXIMATELY 10 SECONDS, OR THE PREVIOUS MODE WILL BE RESTORED.

Instruction	What to do
Press [KEY].	Press and release KEY.
Press	Press and hold KEY until the
[KEY] (1 s).	function begins.
Press	Press KEY1 momentarily,
[KEY1], [KEY2].	release KEY1, then press
	KEY2.
Press	With transceiver power OFF,
[KEY]+ POWER ON.	press and hold KEY, then turn
	ON the transceiver power by
	pressing [PWR].
Press	Press and hold [F] for 1
[F] (1 s), [KEY].	second or longer, then press
	KEY.
Press	Press [F] momentarily, release
[F], [KEY] (1 s).	[F], then press and hold KEY
	for 1 second or longer.
Press	Press and hold [F] down, then
[F] + [KEY].	press KEY.

1