1
2
3
4
5
6
7
8
CALL/VFO SCAN
Use Call/VFO Scan to monitor both the Call channel and the current VFO frequency on the selected band.
1Select the desired band.
2Press [VFO] to select VFO mode.
3Press [CALL] (1 s) to start Call/VFO Scan.
• The 1 MHz decimal blinks while scanning is in progress.
4To quit Call/VFO Scan, press [BAND SEL] for the band being scanned or [CALL].
• When scanning the TX band, you can also press Mic [PTT] to quit Scan.
9
10 
11
Use Call/Memory Scan to monitor both the Call channel
12and the memory channel last used.
131 Select the desired band.
142 Press [MR] to enter Memory Recall mode.
153 Press [CALL] (1 s) to start Call/Memory Scan.
16 
•
4To quit Call/Memory Scan, press [BAND SEL] for the
17
band being scanned or [CALL].
18 
• When scanning the TX band, you can also press Mic
19
[PTT] to quit Scan.
20
21
48