1

NAMING MEMORY CHANNELS

You can name memory channels using up to 7

5Press [SET].

• The first digit blinks.

2alphanumeric characters. When you recall a named memory channel, its name appears on the display with the

3stored frequency. Names can be callsigns, repeater

4 names, cities, names of people, etc.

5Note:

◆You cannot use this function after having selected 140:140 memory

6channel ratio.

◆You cannot name the Call, L1 to L3, nor U1 to U3 channels.

CALL

PWR

VOL SQL

6 Turn the Tuning control, or press Mic [UP]/[DWN], to

7

8

1 Recall the desired memory channel.

2 Press [MNU] to enter Menu mode.

select the first digit.

• To skip by four characters when operating the above

9 3 Select Menu No. 4 (Memory).

10

 

CALL

PWR

11

 

 

 

 

12

 

 

VOL

SQL

 

 

 

13

 

 

 

 

14

4 Press [s], then select item No. 3 (Memory Name).

15

 

 

 

 

16

CALL

 

 

PWR

 

 

 

 

17

 

 

 

 

 

 

 

VOL

SQL

18

2

 

 

 

 

1

 

19

20

21

 

control or keys, press [MHz]. Press [MHz] again to quit

 

this jump function.

7

Press [s].

 

• The second digit blinks.

8

Repeat steps 6 and 7 to enter up to 7 digits.

 

• After entering the 7th digit, pressing [s] causes an error

 

beep to sound.

 

• To re-enter the preceding digit, press [t].

 

• To clear all digits and move back to the first digit, press

 

[VFO].

9

Press [SET] again to complete the setting.

10

Press [MNU] to exit Menu mode.

Note:

◆Names can be assigned only to memory channels in which you have stored frequencies and related data.

◆The stored names can be overwritten by repeating steps 1 to 10.

◆The stored names also are erased by clearing memory channels.

32