■Memory Channel Number Entry

1 Select the desired band.

2 Press [MR] to enter Memory Recall mode.

3 Press the Mic key re-programmed with Enter.

•"– –" or "– – –" appears depending on the number of memory channels available on the current band.

4Use the Mic keypad to enter 2 or 3 digits.

•To recall channel 3, for example, enter "03" or "003".

•If you press any key other than [0] ~ [9], or if you do not make the next entry within 10 seconds, the previous frequency display will be restored.

•If you enter a memory channel that does not contain data, an error beep sounds.

■Tone Frequency Number Entry

1 Select the desired band.

2 Press [TONE] to activate the Tone function.

3Press [F] (1 s), [T.SEL].

•The current tone frequency appears.

4Press the Mic key re-programmed with Enter.

•"– –" appears.

5Use the Mic keypad to enter the Tone No. corresponding to the desired tone frequency.

•Consult the table given in "Selecting a Tone Frequency" {page 25} to find out how the Tone Nos. correspond to the tone frequencies.

•To select Tone No. 3 (74.4 Hz), for example, enter "03".

•If you press any key other than [0] ~ [9], or if you do not make the next entry within 10 seconds, the previous frequency display will be restored.

1

2

3

4

5

6

7

8

9

10

11

12 13

14

15

16

17

18

19

20 21

75