1

STORING DATA IN PM CHANNELS

1 Confirm that the following conditions have been

RECALLING PM CHANNELS

1 Press [PM].

2 satisfied:

3

• Both bands are in the receive mode.

 

•Scan is not being used on either band.

4

•Microphone Control is OFF.

5

2Select the desired band.

6

3Select the desired frequency and related data

7

(Tone, CTCSS, DTSS, etc.) using VFO mode.

84 If required, select another band, then select the desired

frequency and related data.

9

5 Press [F], [PM].

10

• The PM channel numbers appear and blink.

 

11

 

 

12

CALL

PWR

 

2

 

 

13

 

 

14

VOL

SQL

 

 

1

15

166 Press [1] to [4] corresponding to the desired PM channel.

17

• The selected frequency and related data are stored in the

 

18

PM channel.

 

19

20

21

• The PM channel numbers appear.

CALL

 

PWR

VOL SQL

2Press [1] to [4] corresponding to the desired PM channel.

•The contents of the selected channel are recalled.

•The selected channel number appears at the left bottom of the display.

•To exit PM Recall mode, press [PM], [VFO].

Note: You cannot recall a PM memory channel while transmitting.

38