Kenwood TM-V7A, TM-V7E PROGRAM SCAN, ■ Setting Scan Limits

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

PROGRAM SCAN

Program Scan is similar to VFO Scan except that you select the frequency range of the scan.

■ Setting Scan Limits

You can store up to three scan ranges on each band, using memory channels L1/U1, L2/U2, and L3/U3.

1 Select the desired band.

2Turn the Tuning control, or press Mic [UP]/[DWN], to display the desired lower limit.

3 Press [F].

4 Turn the Tuning control, or press Mic [UP]/[DWN], to select channel L1, L2, or L3.

5 Press [MR].

• The lower limit is stored in the channel.

6Turn the Tuning control, or press Mic [UP]/[DWN], to display the desired upper limit.

7Press [F].

8Turn the Tuning control, or press Mic [UP]/[DWN], to select channel U1, U2, or U3.

•If you have selected for example L1 in step 4, select U1.

9Press [MR].

•The upper limit is stored in the channel.

10To confirm the stored scan limits, press [MR], then select the L and U channels.

Note:

◆The lower limit must be lower in frequency than the upper limit.

◆The lower and upper frequency steps must be equal.

◆The lower and upper limits must be selected on the same band.

46