Kenwood TM-V7A, TM-V7E RECALLING MEMORY CHANNELS, CLEARING MEMORY CHANNELS, [MR], [MR], [MR], Tuning, Tuning, [UP]/[DWN], [UP]/[DWN], 5Press [MHz]+ POWER ON

RECALLING MEMORY CHANNELS

1Select the desired band.

2Press [MR] to enter Memory Recall mode.

• The memory channel used last is recalled.

3Turn the Tuning control, or press Mic [UP]/[DWN], to select the desired memory channel.

•Clockwise or Mic [UP]: Increases the channel number.

•Counterclockwise or Mic [DWN]: Decreases the channel number.

•Empty memory channels cannot be recalled.

•To restore the VFO mode, press [VFO].

Note:

υMemory channels can also be recalled via the microphone keypad. See "Memory Channel Number Entry" {page 75}.

υWhen a split memory channel is recalled, "±" appears on the display. Press [REV] to display the transmit frequency.

CLEARING MEMORY CHANNELS

1Select the desired band.

2Press [MR] to enter Memory Recall mode.

3Turn the Tuning control, or press Mic [UP]/[DWN], to select the desired memory channel.

4Switch OFF the power to the transceiver.

5Press [MHz]+ POWER ON.

•A confirmation message appears.

6Press [MR] again.

•The contents of the selected memory channel are erased.

Note: Memory channel 1 cannot be cleared.

1

2

3

4

5 6

7

8

9

10

11

12

13

14

15

16

17

18

19

20 21

31