Electrical Requirements
Volts: 120 A.C. only. Hertz: 60 The wattage rating for your stand mixer is printed on the trim band or on the serial plate.
Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance.
The maximum rating is based on the attachment that draws the greatest load (power). Other recommended attachments may draw significantly less power.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
Troubleshooting Problems
Please read the following before calling your service center.
1.The stand mixer may warm up during use. Under heavy loads with extended mixing time periods, you may not be able to comfortably touch the top of the stand mixer. This is normal.
2.The stand mixer may emit a pungent odor, especially when new. This is common with electric motors.
3.If the flat beater hits the bowl, stop the stand mixer. See the “Beater to Bowl Clearance” section.
Keep a copy of the sales receipt showing the date of purchase. Proof of purchase will assure you of
If your stand mixer should malfunction or fail to operate, please check the following:
-Is the stand mixer plugged in?
-Is the fuse in the circuit to the stand mixer in working order? If you have a circuit breaker box, be sure the circuit is closed.
-Turn the stand mixer off for
-If the problem is not due to one of the above items, see the “Arranging for Service” section.
-Do not return the stand mixer to the retailer as they do not provide service.
7
