Kodak DC220, DC260 manual Power management, Removing the memory card

☞Reformatting a removable memory card deletes all information on the card. This deleted information cannot be recovered.

Removing the memory card

Although your camera can’t take pictures without the memory card, you may want to remove the card to use in another camera or to place in your computer.

To remove the memory card:

1Open the memory card door.

2Flip the memory card release button so it protrudes out from the side of the camera.

WARNING: Do not depress the release button if the red LED under the button is on or blinking. Ejecting the card while this LED is on may result in the loss of all data on the card.

3Depress the release button to release the memory card from the camera.

4Pull the memory card out of the camera.

☞For a more detailed discussion of the memory card, the PCMCIA card, and the KODAK DIGITAL SCIENCE Picture Card Adapter, refer to “Placing the memory card in your computer” on page 7-7.

Power management

You can use batteries or an AC adapter to power your camera. Refer to the following subsections for information about battery and AC adapter use.

To conserve power usage, the camera has a sleep mode. After a specified period of inactivity, the camera enters sleep mode by turning the LCD off. You can set the amount of time before entering sleep mode through the Capture menu settings. Refer to setting the Sleep Timeout preference on page 3-10. After 10 minutes of inactivity, the camera turns itself off.

2

Your camera

2-11