Kodak DC220, DC260 manual Capture

Capture

☞Pressing the DEFAULT softkey restores the default Capture Preference values.

1Press the down arrow to select the particular setting you want to change.

✔File Type—the format in which pictures are saved, either FlashPix (FPX) or JPEG (JPG).

✔Quickview—displays the picture just taken for a duration between 0.5 and 30 seconds.

✔Auto Rotate—rotates pictures automatically in response to a sensor that senses the orientation of the camera and rotates pictures to a vertical plane.

The Auto Rotate sensor does not function well when you are above the subject with the lens perpendicular to the floor. In such cases, Auto Rotate should be OFF.

✔System sounds—plays shutter sounds when a picture is taken and alert sounds when an error occurs.

✔Sleep Timeout—the number of minutes the camera will sit inactive with the LCD on before it goes into the low power mode. In the “sleep” mode, the LCD turns off, the Status Display on the top of the camera remains on, and you can take a picture.

2Press the left and right arrows to change each setting.

3When you are satisfied with the settings, press the DONE softkey.

3-10