Kodak DC260, DC220 manual Adding sound to pictures, Now has attached sound. If a picture has

Adding sound to pictures

You can attach sound to a selected picture at any time while reviewing your pictures from either the filmstrip or full screens.

☞You can only add sound to or play sound associated with burst and timelapse pictures when the series is collapsed.

1 Scroll to view the picture you want to select.

Use any of the three methods described in the “Viewing pictures” section on page 4-5.

2Press and hold the RECORD button.

The microphone icon appears on the screen along with how long you have been recording.

☞Each picture can have only one attached sound clip. If you attempt to attach a second sound clip to a picture, a message appears allowing you to delete the existing sound.

	3 Speak into the microphone on the back of the
	camera.
	4 Release the RECORD button.
☞ If the camera’s volume	A sound icon appears indicating the picture
control is turned down,	now has attached sound. If a picture has
	attached sound, pressing the DELETE
you will not be able to
	softkey allows you to delete the sound alone
hear the sound you have
	or both the picture and sound.
recorded.
☞ The volume control	5 Press the softkey of your choice.
	✔ DELETE—Deletes the sound.
adjusts the volume of
sound clips attached to	✔ SAVE—Saves the sound.
pictures only. You can
turn off System Sounds	✔ PLAY—Plays the sound. Refer to
through Capture	“Playing sound, bursts, and timelapse
Preferences on	sequences” on page 4-14 for information
page 3-10.	on playing sound that has not been newly
	recorded.

4

Reviewing

4-11