Kodak DC260 manual Installing batteries, Always follow your battery manufacturers directions fully

To reactivate your camera from the sleep mode:

✔In the Review mode, press the DISPLAY button.

✔In the Capture mode, use the ZOOM or SHUTTER as you normally would to take a picture.

Installing batteries

To install the batteries:

1Open the battery door.

2Slide the inside battery cover toward the back of the camera and then lift it away from the camera.

3Insert the batteries as indicated on the battery cover.

4Close and lock the inside battery cover and close the battery door.

	WARNING:	When using batteries, limit the continuous operation of the LCD
		for previewing pictures to less than 30 minutes. This is
		particularly true with Lithium batteries. Previewing pictures
		requires a significant electrical current, which over time could
		cause your batteries to heat up significantly. Should your camera
		become too hot inside, it is designed with protective circuitry to
		turn itself off. You should allow sufficient time for the camera to
		cool before turning it on again. Consider using an AC adapter
		when using preview mode for extended periods.
		Always follow your battery manufacturer's directions fully.
2-12