Album settings (DC260 only)

Album settings specify the album into which pictures will be stored. All future pictures are stored in the selected album until you change the album setting.

1Press the down arrow to select one of the following selections:

To remove an album, highlight it and then press the DISSOLVE softkey. The album is removed, but its pictures are retained outside the album.

No Album—your pictures are not stored in an album.

New Album—allows you to create a new album. The New Album Name screen appears.

Press the up and down arrows to select a character. Press the right arrow to add the selected character to the name. Add additional characters until you have spelled the name you want using a maximum of 8 characters. When you are satisfied with the name, press the DONE softkey to return to the Album Settings screen. Press the down arrow to select the new album.

An existing album name—your pictures are stored in the album you select.

2Press the SELECT softkey.

3Press the DONE softkey.

Script setting

The Script setting allows you to run a predefined script that’s been downloaded to the System folder on the camera’s memory card. Scripts can be created to appear on any screen, not only the Script setting screen.

A script can prompt you for certain actions and define the behavior of the camera and its settings. For example, a script can set the camera to take burst pictures at a certain rate. The script can then prompt you, using text on the LCD, to take a picture and the camera waits for you to press the SHUTTER button.

The DC220 and DC260 can run DIGITA-compatible scripts. These scripts add new selections to existing menus or can create new menus and choices

3-5

3

Taking pictures

Page 31
Image 31
Kodak DC220 manual Album settings DC260 only, Script setting