Kodak DC220, DC260 manual Camera Problem Cause Solution

Camera

Problem	Cause	Solution
Part of the picture is missing.	Something was	Keep hands, fingers,
	blocking the lens	or other objects away
	when the picture was	from the lens when
	taken.	taking pictures.
	Your eye or the picture	Leave space around
	was not centered	subject when
	correctly in the	centering picture in
	viewfinder.	viewfinder.
Picture is too dark.	Flash is not on or did	Turn on the flash. See
	not go off.	“Flash” on page 2-4.
	The subject is too far	Move so there is no
	away for the flash to	more than 10 feet
	have an effect.	(3 m) between the
		camera and the
		subject.
	The subject is in front	Change your position
	of a bright light.	so the light is not
		behind the subject.
Picture is too light.	The flash is not	Change to automatic
	needed.	flash. See “Flash” on
		page 2-4.
	The subject is too	Move so there is at
	close when the flash	least 1.6 ft. (0.5 m)
	was used.	between the camera
		and the subject.
	The light sensor is	Hold the camera so
	covered.	your hands or other
		objects do not cover
		the light sensor.
Stored pictures are damaged.	The memory card was	Make sure the Ready
	removed when the	light is not blinking
	Ready light was	before removing the
	blinking.	memory card.
Pictures remaining number	The image resolution	The camera is
does not decrease.	does not take up	operating normally.
	sufficient space to	Continue taking
	decrease the picture	pictures.
	remaining number.

9-6