Kodak DC260, DC220 manual Potential connection problems

Potential connection problems

Here are some issues that might come up when attempting to connect your camera to your computer and some ways to correct them:

Windows/DC220 DC260 Camera Communications

Problem	Cause	Solution
Computer cannot	Camera power is off.	Turn the camera on.
communicate with the camera.
	The Mode dial is not	Set the camera’s Mode
	set to Connect.	dial to Connect.
	Conflict with another	Refer to the serial
	serial device, such as a	communication or
	modem.	corresponding section
		of your computer’s
		modem, and/or
		operating system’s
		user’s guide.
	Some Advanced	See the Power
	Power Management	Management section
	utilities on laptops can	of your laptop’s user
	turn off ports to save	guide to disable this
	battery life.	feature.
	Camera is not	Connect serial cable to
	connected to serial	camera and COM
	cable or cable is not	port. See “Connecting
	connected to the	via a serial cable” on
	computer’s COM port.	page 6-3.
	Infrared port is not	Check the computer’s
	responding.	infrared connection.
		Be sure that the
		camera is on.
	The BIOS has a	Change the port
	different port assigned	setting in Camera
	as the infrared port.	Properties to reflect
		the port value assigned
		in the BIOS.

6-8