Kodak DC220, DC260 manual Specifying General settings, Additional settings appear

✔Select the Camera Properties button from the camera’s TWAIN Software screen

✔Select the Properties button from the KODAK DIGITAL SCIENCE Picture Easy Software 3.0 screen

✔Select DC220 or DC260 Camera Properties from the Start Programs menu.

The remaining sections of this chapter assume that you have started the Camera Properties software and are viewing the first tab, General settings.

Specifying General settings

The GENERAL settings tab is selected by default.

1 Specify the settings.

Refer to the following subsections for a brief description of each setting.

2 If you want to see more settings, click the ADVANCED button.

Additional settings appear.

3 To apply these settings to the

camera, click the APPLY button.

☞ To revert to a screen’s default settings, click the DEFAULTS button.

Communications Method—Defines the type of connection you want to use between the camera and your computer.

Baud Rate—Defines the rate at which the camera and the computer communicate. This field is greyed out if USB or IrDA is selected as the communication method.

5-2