Kodak DC260, DC220 manual Camera Problem Cause Solution

Camera

Problem	Cause	Solution
Ready light does not turn on	Batteries are low or	Replace the batteries
and the camera does not work.	empty.	or use the AC Adapter.
		Pictures remain in the
		camera’s memory
		when the battery is
		removed.
	Camera is not turned	Turn the camera on
	on.	and verify that the
		green Ready light
		turns on.
Ready light is red.	No memory card in	Insert a new memory
	camera or the memory	card.
	card is full.
Shutter button does not work.	Camera is not turned	Turn the camera on
	on.	and verify that the
		green Ready light
		turns on.
	Mode dial is not set to	Set the Mode dial to
	Capture.	Capture.
	Ready light is	Wait until Ready light
	blinking. Camera is	stops blinking before
	processing picture.	attempting to take
		another picture.
	The Status Display	Transfer pictures to
	reads Full . The	your computer or
	memory card is full.	insert a memory card
		that has available
		memory.
Camera does not turn on.	Batteries are not	Remove the batteries
	properly installed.	and install them
		according to the
		directions on the
		inside of the battery
		door.
	Batteries are weak or	Install new batteries or
	dead.	use the AC Adapter.

9

Troubleshooting

9-5