Kodak DC260, DC220 manual Specifying Picture Type settings, High

the macro position. Off enables the zoom control and sets the lens position to 28mm. This is also known as Close-up mode. You can also set this setting through the SCROLL and SELECT buttons on the camera.

Advanced capture mode— Programmed AE automatically determines the appropriate shutter speed and aperture settings but allows you to choose an exposure compensation value from a drop down list. Long time exposure allows you to select the shutter speed setting from a drop down

list. External flash (DC260 only) allows you select the aperture setting from a drop down list. You can also set this setting through the Capture mode settings on the camera.

Zoom—The position of the zoom lens. The DC220 ranges from 28mm to 58mm in four steps. The DC260 ranges from 38mm to 115mm in six steps.

Specifying Picture Type settings

1 Click the PICTURE TYPE SETTINGS tab.

2 Specify the settings.

Refer to the following subsections for a brief description of each setting.

3 To apply these settings to the

camera, click the APPLY button.

Picture Capture State—Choose the type of picture— Still , Burst , or Timelapse —for which you want to set Picture Type settings. The other fields on the screen change depending on the type of picture.

Picture quality— Best compresses a picture the least and has the highest image quality. Better compresses a picture more and has a lower image quality. Good compresses a picture the most and has the lowest image quality. You can also set this setting through the Capture mode settings and through the SCROLL and SELECT buttons on the camera.

Resolution—The number of pixels that make up each picture, either	High
(1152 x 864 pixels DC220, 1536 x 1024 pixels DC260), Medium	(1152 x

768 pixels DC260 only), or Standard (640 x 480 pixels DC220, 768 x 512 pixels DC260). The more the merrier when it comes to pixels and the quality of your pictures. You can also set this setting through the Capture

5-5

5

2

YourCamera cameraproperties