Kohler 3.5CFZ, 4CZ, 5CFZ, 6.5CZ installation manual Accessories

Accessories

Several accessories are available to finalize the installation or to add convenience to operation and service. All the most current information can be obtained by contacting the local authorized Kohler dealer/distributor. Available accessories at the time of print of this publication are as follows.

Sound Shield

(Optional on 3.5CFZ/4CZ; Standard on 5CFZ/6.5CZ)

Provides for highly effective silencing, ease of access for engine/generator servicing, low maintenance, excellent durability, and safety.

Seawater Strainer

The seawater strainer with clear viewing container, allows easy cleaning and maintenance. Threaded for 1/2 NPT fittings.

Ship-to-Shore Transfer Switch

The ship-to-shore transfer switch allows immediate switching to generator set power or shore power protecting the electrical system from the possibility of simultaneous connection of both power sources.

Remote Start Panel

Allows starting/stopping from a location remote of the generator set. Supplied with 15 foot (4.6 m) connection harness. Overall mounting dimensions are 4 1/16 in. (103 mm) by 2 1/8 in. (54 mm) with a minimum mounting depth of 2 1/4 in. (57 mm).

Model	Amps	Poles
4CZ/3.5CFZ	18	2
4CZ/3.5CFZ	35	1
4CZ/3.5CFZ	20	1
6CZ/5CFZ	30	2
6CZ/5CFZ	55	1
6CZ/5CFZ	25	2
6CZ/5CFZ	20	1

Remote Start and

Four-Meter Panel Kit

Allows starting/stopping from a location remote of the generator set. The illuminated meters/gauges include a DC voltmeter, engine oil pressure gauge, water temperature gauge, and an hourmeter which records total generator set operating hours. Overall dimensions are 9 in. (229 mm) by 6 in. (152 mm) with a minimum mounting depth of 4 in. (102 mm). Requires remote connection/extension harness and sender kit.

Remote Start and

Two-Meter Panel Kit

Allows starting/stopping from a location remote of the generator set. The illuminated gauges include engine oil pressure gauge and water temperature gauge. Overall dimensions are 6 in. (152 mm) by 6 in. (152 mm) with a minimum mounting depth of 2 3/4 in. (70 mm). Requires remote connection/extension harness and sender kit.

Remote Connection/

Extension Harness

Provides additional wiring between all remote panels and controller connector. One required for each remote meter panel kit. Available in 15 ft. (46 m) and 25 ft. (76 m) lengths. Extension limited to a total of four kits and 75 ft. (23 m).

Sender Kit

Provides gauge senders for the remote start and two-meter panel kit and the remote start and four-meter panel kit. The gauge sender kit is required to make the oil pressure and water temperature gauges functional.

Circuit Breakers

12-Inch Remote Wiring Harness

This one foot (0.3 m) wiring harness has a 6-pin connector on one end which is keyed to controller box connector. The other end has pigtails for connection to customer-supplied start switch, generator “on” light, hourmeter, etc.

Siphon Break

See price list or dealer/distributor for proper application of circuit breakers.

Prevents the siphoning of water into the engine on generator sets installed below the waterline.

TP-5695 12/93 Specifications 1-5