Konica Minolta 2530 DL manual Solving Other Problems, 108, Toner

Solving Other Problems

!" To order KONICA MINOLTA consumables, go to www.q-shop.com.

Symptom	Cause	Solution
Printer	The power cord is not	Turn off the printer, confirm that the
power is not	correctly plugged into	power cord is correctly plugged into the
on.	the outlet.	outlet, and then turn on the printer.
	Something is wrong	Plug another electrical appliance into
	with the outlet con-	the outlet and see whether it operates
	nected to the printer.	properly.
	The power switch is	Turn the power switch off (O position),
	not correctly turned	then turn it back to the on (I position).
	on (I position).
	The printer is con-	Use a power source with the specifica-
	nected to an outlet	tions listed in appendix A, “Technical
	with a voltage or fre-	Specifications.”
	quency that does not
	match the printer
	specifications.
The control	One of the toner car-	Remove the toner cartridges and check
panel dis-	tridges may be defec-	for damage. If it is damaged, replace it.
plays	tive.
TONER
	You printed with	See specifications in Appendix A.
LOW much	heavy toner cover-
sooner than	age.
expected.
You can’t	The tray is empty.	Check that at least Tray 1 is loaded
print the con-		with media, in place, and secure.
figuration
	The printer’s covers	Make sure the covers are closed
page.
	aren’t closed	securely. Close all covers gently to
	securely.	avoid jarring the printer.
	There is a media	Clear the media misfeed.
	misfeed.

108 Solving Other Problems