Konica Minolta 2530 DL manual Engine

TRAY CHAINING		Settings	ON / OFF
		When set to ON, the printer automatically
		switches to a different tray containing media
		of the same size and type, if the specified tray
		runs out of media.
		When set to OFF, the printer stops and
		displays a message indicating that media
		should be loaded into the specified tray if the
		specified tray runs out of media.
ENGINE	Use this submenu to view information related to the engine.
SERVICE	TOTAL FACE	The number of page faces that have been
	COUNT	printed to date.
	COLOR FACE	The number of color page faces that have
	COUNT	been printed to date.
	BW FACE	The number of monochrome page faces that
	COUNT	have been printed to date.
	CONTROL-	The current controller firmware version.
	LER VER.
	ENGINE	The printer engine firmware version.
	VER.
	COLOR	Performs color calibrations in order to adjust
	CALIBRA-	the color shift.
	TION
	REMOVE	All toner cartridges can be removed.
	ALL TONER	First, the cyan (C) toner cartridge is rotated,
		so that it can be removed. After it is removed
		and all covers are closed, the black (K) toner
		cartridge is rotated, so that it can be removed.
		In the same way, the yellow (Y) and magenta
		(M) toner cartridges are rotated one by one,
		so that they can be removed.
	ENERGY	Settings	ON / OFF
	SAVER
		When set to ON, Energy Saver is enabled.
		When set to OFF, Energy Saver is disabled
		and the ENGINE/ENERGY SAVER menu is
		not displayed.
		This menu is displayed only on the model for
		the Americas.

30 Configuration Menu Overview