Konica Minolta 2530 DL manual Dual In-Line Memory Module Dimm 129

2Using a screwdriver, remove the screw on the back of the printer.

3Remove the rear panel.

!" Since there are two hooks on the right side of the panel, remove the rear panel by slightly pull- ing the left side of the panel toward you, then sliding the panel off to the left.

4Insert the new DIMM straight into the DIMM connector until the latches snap into the locked position.

Observe the keyed side of the DIMM to align it with the connec- tor. If you cannot snap the DIMM into place, do not force it. Repo- sition it, making sure that the DIMM is seated completely in the connector.

Dual In-Line Memory Module (DIMM) 129