Konica Minolta 2530 DL manual Network Menu, Dhcp Setoff, Bootp Seton, Bootp Setoff

ENGINE	RESTORE	Resets the ENERGY SAVER, AUTO
SERVICE	USER	CONTINUE and TRAY CHAINING menus
	DEFAULT	to the factory defaults. In addition, the
		PageScope Web Connection administrator
		password is reset to the default password.
		For details of the PageScope Web
		Connection administrator password, refer to
		the magicolor 2530 DL Reference Guide.

Network Menu

If the printer is connected to a network, the following settings should be spec- ified. For details about each setting, contact your network administrator.

!" All factory default values are shown in bold.

DHCP	Settings	DHCP SET:ON
		BOOTP SET:OFF
		DHCP SET:OFF
		BOOTP SET:ON
		DHCP SET:OFF
		BOOTP SET:OFF
	If there is a DHCP server on the network, specify whether the
	IP address is automatically assigned by the DHCP server and
	other network information is loaded.
BOOTP	Specifies whether the IP address is automatically assigned by
	BOOTP and other network information is loaded.
IP	Setting	192.168.1.2
ADDRESS
	Sets the IP address of this printer on the network. Use the Up,
	Down, Left, and Right keys to enter the value.
	When manually setting the IP address, first set DHCP and
	BOOTP to OFF.
SUBNET	Setting	255.255.255.0
MASK
	Sets the subnet mask value of the network. Use the Up,
	Down, Left, and Right keys to enter the value. When manually
	setting the Subnet Mask, first set DHCP and BOOTP to OFF.

Configuration Menu Overview 31