Konica Minolta 2530 DL manual Installing a Dimm, 128

Required Memory during Printing

	600 x 600 dpi	2400 x 600 dpi
	1200 x 600 dpi	2400 x 600 dpi (Line art)
Monochrome	64 MB	64 MB
(Simplex/Duplex)
Full color	64 MB	64 MB
(Simplex)
Full color	128 MB	256 MB
(Duplex)

Installing a DIMM

Note

It’s very important to protect the printer controller board and any associated circuit boards from electrostatic damage. Before performing this procedure, review the antistatic caution on Page 126. In addition, always handle circuit boards by the edges only.

1Turn off the printer and discon-

nect the power cord and inter- face cables.

!" If the duplex option is installed, remove it.

128 Dual In-Line Memory Module (DIMM)