Konica Minolta 2530 DL Auto/Auto/On / Auto/Full/On, AUTO/HALF/ON / 100M/AUTO/ON, 10M/HALF/OFF

FORCED MODES

Settings	AUTO/AUTO/ON / AUTO/FULL/ON /
	AUTO/HALF/ON / 100M/AUTO/ON /
	100M/FULL/ON / 100M/FULL/OFF /
	100M/HALF/ON / 100M/HALF/OFF /
	10M/AUTO/ON / 10M/FULL/ON /
	10M/FULL/OFF / 10M/HALF/ON /
	10M/HALF/OFF

Some network hubs will not communicate with printers that use a fixed network speed and structure. In such cases, use the new NETWORK/FORCED MODES menu to configure the printer for the appropriate hub settings and enable communi- cation.

#The first value indicates the network transmission speed (SPEED). Select from a 10Base-T connection (10M), 100Base-TX connection (100M), or automatic recognition (AUTO). If AUTO is selected, the transmission speed is set depending on the negotiation; therefore, there is no setting where negotiation is turned off.

#The second value indicates the communication method for bi-directional communication (DUP). Select whether data is sent and received in both directions simultaneously (FULL) or in one direction at a time (HALF), or select automatic recognition (AUTO). If AUTO is selected, the transmission speed is set depending on the negotiation; therefore, there is no setting where negotiation is turned off.

#The third value indicates the negotiation (NEG.) setting (mutually sends and receives information such as the transmission speed and determines the transmission set- ting). When set to ON, negotiation is performed. When set to OFF, negotiation is not performed.

Configuration Menu Overview 33