Konica Minolta 2530 DL manual Understanding the Media Path, Clearing Media Misfeeds

Understanding the Media Path

Understanding the printer’s media path will help you locate media misfeeds.

1	Output tray
2	Transfer belt unit	1	8
3	Toner cartridge carousel	2
4	Drum cartridge	3	7
5	Tray 1
		4
6	Tray 2 (optional)	5
7	Duplex option
8	Fuser unit	6

Clearing Media Misfeeds

To avoid damage, always remove misfed media gently, without tearing it. Any piece of media left in the printer, whether large or small, can obstruct the media path and cause further misfeeds. Do not reload media that has misfed.

Note

The image is not fixed on the media before the fusing process. If you touch the printed surface, the toner may stick to your hands, so be careful not to touch the printed face when removing the misfed media. Make sure not to spill any toner inside the printer.

CAUTION

Unfused toner can dirty your hands, clothes, or anything else it gets on. If you accidentally get toner on your clothes, lightly dust them off as best as you can. If some toner remains on your clothes, use cool, not hot water, to rinse the toner off. If toner gets on your skin, wash it off with cool water and a mild soap.

CAUTION

If you get toner in your eyes, wash it out immediately with cool water and consult a doctor.

If, after clearing the media misfeed, the misfeed message in the control panel window persists, open and close the printer’s top cover. This should clear the misfeed message.

96 Understanding the Media Path