Konica Minolta 2530 DL manual Thick Stock, Media Types, Do not use thick stock that is

!" Keep media between 35% and 85% relative humidity. Toner does not adhere well to moist or wet paper.

#Layered

#Adhesive

#Folded, creased, curled, embossed, warped, or wrinkled

#Perforated, three-hole punched, or torn

#Too slick, too coarse, or too textured

#Different in texture (roughness) on the front and back

#Too thin or too thick

#Stuck together with static electricity

#Composed of foil or gilt; too luminous

#Heat sensitive or cannot withstand the fusing temperature (180°C [356°F])

#Irregularly shaped (not rectangular or not cut at right angles)

#Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons

#Acidic

#Any other media that is not approved

Thick Stock

Paper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock. Test all thick stock to ensure acceptable performance and to ensure that the image does not shift.

Capacity	Tray 1	Up to 50 thick stock sheets, depending on
		their thickness
	Tray 2	Not supported
Orientation	Face up
Driver	Thick stock (91 to 163 g/m2)
Media Type
Weight	91 to 163 g/m² (25 to 43 lb)
Duplexing	Not supported

!" 43 lb bond is also referred to as 90 lb index stock.

DO NOT use thick stock that is

#Mixed with any other media in the trays (as this will cause printer misfeed- ing)

Media Types 45