Konica Minolta 2530 DL manual Status, Error, and Service Messages

This message...	means...	do this...
MEDIA JAM	Media has misfed in	Locate and remove the
DUPLEX LOWER	the duplex option.	misfeed.
MEDIA JAM	Media has misfed in
DUPLEX UPPER	the duplex option.
MEDIA JAM
FUSER
MEDIA JAM	Media has misfed in
TRANSFER ROLLER	the transfer roller
	area. This type of
	misfeed means that
	the media did not
	make it to the paper
	exit area.
MEDIA JAM	Media has misfed
TRAY X	while being pulled
	from the specified
	tray (X).
PUT MEDIA : TRAY 1	The media type set in	Load the correct media
“MEDIA”	the printer driver is	type into Tray 1.
	different from the type
	of media loaded into
	Tray 1.
PUT MEDIA : TRAY X	The media size set in	Load the correct media
“SIZE”	the printer driver is	size into the specified
	different from the size	tray.
	of media loaded.
SIZE/TYPE ERROR	Unsupported media	Load the correct media
	(wrong size, thick-	size and type.
	ness, type, etc.) is
	being used.
SIZE/TYPE ERROR	Media not compatible	Use the correct media
DUPLEX	with duplex printing.	size and type when
		duplexing.
TONER LIFE END	The X toner cartridge	Replace the toner car-
X	is empty.	tridge.
	(Appears when
	ENGINE/TONER
	EMPTY STOP is set)

122 Status, Error, and Service Messages