Konica Minolta 2530 DL manual Dual In-Line Memory Module Dimm 127, Recommended DIMMs

Dual In-Line Memory Module (DIMM)

Adual in-line memory module (or DIMM) is a compact circuit board with sur- face-mount memory chips.

Your printer comes with 64 MB SDRAM printer memory on board. However, you can upgrade to a maximum of 576 MB of RAM through the installation of an additional unbuffered SDRAM DIMM. Your printer comes with one free DIMM slot.

DIMM’s Specifications

Capacity	128 MB, 256 MB, 512 MB
Module Type	unbuffered NonECC
Pin Count	168-pin
Configuration	16M x 64bit, 32M x 64bit, 64M x 64bit
Data Rate	100 MHz, 133 MHz
CAS Latency	3
Voltage	3.3 V

!" Your printer recognizes only single-sided DIMMs. If you install a dou- ble-sided DIMMs, the printer may recognize only half of the memory available on that DIMMs.

Recommended DIMMs

1)128 MB DIMM - CT16M64S4D7E(Crucial)

2)256 MB DIMM - VS133-S256/HB(Buffalo)

3)512 MB DIMM - 0286-0005(Centon)

!" For details on the available DIMMs, refer to printer.konicaminolta.com.

Dual In-Line Memory Module (DIMM) 127