Konica Minolta 2530 DL manual Solving Problems with Printing Quality 115

The fuser separator Return the fuse separator levers to the levers are adjusted plain paper setting.

for envelope printing.

Media type is set incorrectly.

When printing envelopes, labels, post- cards, thick stock, or transparencies, specify the appropriate media type in the printer driver.

There is The media is moist Remove the moist media and replace it

insufficient from humidity. with new, dry media.

fusing or the Unsupported media Use KONICA MINOLTA-approved

image (wrong size, thick- media. See “Media Specifications” on comes off ness, type, etc.) is page 42.

when being used. rubbed.

Irregular The media is moist Adjust the humidity in the media stor-

print or mot- from humidity. age area.

tled imageRemove the moist media and replace it

appears.with new, dry media.

Unsupported media Use KONICA MINOLTA-approved (wrong size, thick- media. See “Media Specifications” on ness, type, etc.) is page 42.

being used.

One or more of the Remove the toner cartridges and check toner cartridges may for damage. If it is damaged, replace it. be defective.

The drum cartridge is Remove the drum cartridge and check

defective.for damage. If it is damaged, replace it.

The fuser separator Return the fuse separator levers to the levers are adjusted plain paper setting.

for envelope printing.

Symptom	Cause	Solution
The print or	One or more of the	Remove the toner cartridges and
color density	toner cartridges may	check for damage. If it is damaged,
is uneven.	be defective or low.	replace it.
	The drum cartridge is	Remove the drum cartridge and check
	defective.	for damage. If it is damaged, replace it.
	The printer is not	Place the printer on a flat, hard, level
	level.	surface.

Solving Problems with Printing Quality 115