Konica Minolta 2530 DL manual Status, Error, and Service Messages

Service Messages

These messages indicate a more serious fault that can only be corrected by a customer service engineer. If one of these messages appears, turn the printer off, then turn it on again. If the problem persists, contact your local vendor or authorized service provider.

This service	means...	do this...
message...
ERROR	AIDC sensor error.	Contact Technical Sup-
AIDC SENSOR		port with the error infor-
		mation.
ERROR	A communication error	Check that the interface
COMMUNICATION	occurred in the USB or	cable is properly con-
	Ethernet interface.	nected to the printer.
		If the error continues to
		appear even though the
		cables are correctly con-
		nected, contact Techni-
		cal Support.
ERROR	Controller internal error.	Contact Technical Sup-
CONTROLLER		port with the error infor-
		mation.
ERROR	A communication error	Contact Technical Sup-
ENGINE INTERFACE	occurred with the engine	port with the error infor-
	controller.	mation.
FATAL ERROR	An error has been	Reboot the printer. This
CODE:XX	detected with the item	often clears the service
	indicated “XX” in the ser-	message, and printer
	vice message.	operation can resume.
		If the problem persists,
		contact Technical Sup-
		port.

124 Status, Error, and Service Messages