Konica Minolta C30P Finishing, Job Separation Printing, MENU, PAPER, FINISHING, Finishing, Media Size, Media Types, JOB SEPARATION, Width: 182 to 216 mm, Length: 257 to 355.6 mm

Finishing

When the optional staple finisher is installed, job separation, offset and staple printing can be performed. For the installation procedure, refer to “Staple Fin- isher” on page 244. Settings can be specified for job separation, offset and staple printing by selecting JOB SEPARATION or FINISHING in PAPER

MENU." Use the following paper with job separation, offset and staple printing.

Media Types	Plain paper, Recycled paper and Letterhead
	(changes according to the paper thickness)
Media Size	Width: 182 to 216 mm

Length: 257 to 355.6 mm

" Paper is fed to the main output tray with job separation, offset and staple printing.

Job Separation Printing

When paper is fed to the main output tray, the pages are fed out shifted as shown below.

" When paper is fed to the sub output tray, the pages are fed out stacked on top of each other without begin shifted.

" If staple printing is selected, the pages are stapled together before being fed out.

1 2 3

1 2 3

4 1

2

128 Finishing