Konica Minolta C30P Error Messages (Operator Call:, “SIZE”, “MEDIA”, UNABLE TO, STORE JOB, COVER OPEN, COVER OPEN, COVER OPEN, COVER OPEN, SIDE COVER, COVER OPEN, COVER OPEN

Error Messages (Operator Call:			)
	This message...	means...		do this...
	ADJUST TRAY1	Tray 1 is removed		Install Tray 1
		from the printer.
	COVER OPEN	The duplex cover is		Close the duplex cover.
	DUPLEX COVER	open.
	COVER OPEN	The finisher cover is		Close the finisher cover.
	FINISHER COVER	open.
	COVER OPEN	The printer’s front		Close the front cover.
	FRONT COVER	cover is open.
	COVER OPEN	The printer’s right		Close the right side
	SIDE COVER	side cover is open.		cover.
	COVER OPEN	The stapler cover is		Close the stapler cover.
	STAPLER COVER	open.
	COVER OPEN	The right side cover		Close the right side
	TRAYX COVER	of Tray X (Tray 3 or		cover of the tray.
		4) is open.
	COVER OPEN	The upper cover is		Close the upper cover.
	UPPER COVER	open.
	FUSER MISSING	The fuser unit is not		Contact Technical Sup-
	CHECK UNIT	installed.		port with the error infor-
				mation.
	HOLD JOB ERROR	The specified print job		Print jobs can be saved
	UNABLE TO	saved on the hard		only if a hard disk is
	STORE JOB	disk is sent while the		installed. If desired,
		hard disk is not		install a hard disk.
		installed.
	HOLD JOB ERROR	When printing a		Change the printer con-
	“OPTIONAL”	stored job, the printer		figuration to that when
	PRESS CANCEL	configuration was		the job was stored.
		changed since the job
		was stored.
	MANUAL EMPTY	Tray 1 was specified		Load the correct media
	“SIZE”	with the printer driver		into Tray 1.
	“MEDIA”	as Manual Feed for
		printing, but Tray 1 is
		empty.

Status, Error, and Service Messages 219