Replacing the Transfer Belt Unit

When the time to replace the transfer belt unit is reached, the message TRANS. BELT/END OF LIFE appears. Printing can continue even after this message appears; however, since the print quality is reduced, the transfer belt unit should be replaced immediately.

1 Open the printer’s front cover.

2 Remove the print unit and waste toner bottle.

" For details on removing the print unit or waste toner bottle, refer to “Replacing a Print Unit” on page 139 or “Replac- ing the Waste Toner Bot- tle” on page 145.

" Cover the removed print unit to protect it from direct sunlight.

152

Replacing Consumables