Konica Minolta C30P JOB, OUT, /NO, NET, YES, OFF, OFF, TIME, MASK, DHCP, ETHER, BOOTP, TCP/IP, ENABLE, YES/NO, SUBNET, ON/OFF, DHCP/BOOTP, 5 seconds-15 seconds-300seconds

" All factory default values are shown in bold.

JOB	Settings	5 seconds-15seconds-300 seconds
TIME-
	Specify the timeout interval for a print job being received.
OUT
ETHER-	TCP/IP	ENABLE	Settings		YES/NO
NET
			If YES is selected, TCP/IP is enabled.
			If NO is selected, TCP/IP is disabled.
		IP	Setting		000.000.000.000
		ADDRESS
			Set the IP address for this printer on the
			network.
			Use the	,		,	, and	keys to
			specify the value.
			If the IP address is manually specified,
			DHCP/BOOTP is automatically set to
			OFF.
		SUBNET	Setting		255.255.000.000
		MASK
			Specify the subnet mask for the network.
			Use the	,		,	, and	keys to
			specify the value.
		DEFAULT	Setting		000.000.000.000
		GATEWAY
			Specify the IP address of the router if one
			is on the network. Use the					, , ,
			and	keys to specify the value.
		DHCP/	Settings		ON/OFF
		BOOTP
			Select whether or not the IP address is
			automatically acquired.
			If ON is selected, the IP address is auto-
			matically acquired.
			If OFF is selected, the IP address is not
			automatically acquired.

Configuration Menu Overview 73