Konica Minolta C30P SYS, SYS, I-UNITLOW, TONER LOW, I-UNITLIFE, ENABLE WARN, TONER EMPTY, ENABLE WARN, DEFAULT MENU, DEFAULT MENU, ING/I-UNITLOW, STAPLER EMPTY

This message...	means...	do this...
I-UNIT LOW	The X print unit is low	Prepare the specified
X	and should be	color print unit.
	replaced within 2,000
	pages at 5% cover-
	age of letter/A4
	pages.
	(Appears when SYS
	DEFAULT MENU/
	ENABLE WARN-
	ING/I-UNIT LOW
	is set to ON.)
I-UNIT LIFE	The X print unit has	Replace the print unit.
X	reached the end of its
	life.
STAPLER EMPTY	The staple finisher	Replace the staple
	has run out of staples.	cartridge.
	Otherwise, the
	staples are almost
	empty.
TONER EMPTY	The X toner cartridge	Replace the toner car-
X	is empty.	tridge.
		Printing does not stop
		immediately when this
		message appears.
		Therefore, if printing is
		continued, the Operator
		Call message “TONER
		EMPTY” appears, and
		then printing stops.
		(Refer to page 222.)
TONER LOW	The X toner cartridge	Prepare the specified
X	is low and should be	color toner cartridge.
	replaced within 1,200
	pages at 5% cover-
	age of letter/A4
	pages.
	(Appears when SYS
	DEFAULT MENU/
	ENABLE WARN-
	ING/TONER LOW is
	set to ON.)

Status, Error, and Service Messages 217